Davies Craig EWP115 alloy pump & LCD controller combo

SKU: DC8950
Sale!

Description

Davies Craig EWP115 alloy pump & LCD controller combo

Take total control of your engine cooling with the Davies Craig EWP 115 Alloy Electric Water Pump and LCD EWP /Fan Digital Controller. The Controller will also manage the operation of your Thermatic Fan.

The EWP 115 (115 litres per minute) pump is suitable for small, medium, large, high-performance and 4WD vehicles. It s a performance accessory that improves engine cooling control and capacity whilst giving you more power and torque and improved fuel economy.

 

Kit Contents

EWP COMPONENTS

HARDWARE BAG COMPONENTS

Description

Qty

Description

Qty

EWP115 Alloy

1

Scotch Lock

1

EWP & FAN LCD Controller

1

Ring Terminal

1

Inline Adaptor

1

Ring Terminal (Yellow)

1

Wiring Harness (10A Fuse)

1

Self Tap Screws

1

Thin Rubber Sleeves

4

Temp Sensor Assembly

1

Hose Clamps

4

Mount Pad Hook & Loop 1

EWP Hardware Bag

1

   

 

Technical Specifications
Technical Specifications – EWP115   Technical Specification – LCD Controller
Operating voltage 3V DC to 15V DC Voltage range 12V DC to 29V DC
Maximum current 10A @ 13V Display LCD size 70mm (2.76 ) x 60mm (2.36 )
Flow rate (max) 115 L/min (30.38 US gal/min) @ 13V DC Maximum current 12Amps
Operating temp. -40 to 130 C (-40 to 266 F) Warning alarm High & low Temp., Above set temp., Sensor short circuit, Pump error, High & low voltage and Sensor open circuit
Pump design

Clockwise centrifugal with volute chamber

Targeted (set) temperatures Singular degrees from:
60 C (140 F) to 100 C (212 F)
Pump weight 920 grams (2.3 lb) Memory Set & targeted temperature
Pump material Aluminium (Powder Coated) Fan cut-in temp. 3 C (5.4 F) above the targeted (set) temperature
Burst pressure 500 kPa (72.5 psi) Controller type PCB with micro-processor
Seal Ceramic face seal Sensor type Thermister in housing

Fits hose sizes

&

Internal Thread

35mm to 51mm (1.38 to 2 )

 

-Inlet & Outlet: -16AN (12)

Overrun/ shutdown -10 C (14 F) below set/target temperature or 3 minutes
Indicators Temperature, power, EWP, test, fan, high & low temp, voltage, above set temperature (with alarm)
Push-On fitting Size

EWP Inlet & Outlet 38mm

  • with 3mm Sleeve (#8510) 44mm
  • with 6mm Sleeve (#8511) 51mm
Weight 100 grams (3.5 oz)
Dimensions

Length = 95mm (3.7″)

Width = 130mm (5.1″)

Depth = 25mm (1 )

 

Mechanical belt-driven water pumps run directly off the motor and sap engine power the EWP 115 is hardwired into your electrical system, by-passing the engine and releasing up to an additional 10kw (13hp). Combined with the LCD EWP / Fan Digital Controller, the pump continues to run after you ve switched off, eliminating heat soak and extending engine life.

Davies, Craig s revolutionary, Australian-designed EWP pumps are made from anti-corrosive, lightweight Alloy reinforced with fibreglass. Universal fit allows for easy mounting into the bottom radiator hose. Our kits come with easy-to-understand DIY instructions and everything you need for easy installation, including different adaptors to fit various hose sizes and all necessary electrical wiring.

The EWP 115 and LCD EWP / Fan Digital Controller Combo Pack is the most economical way to increase horsepower and save on fuel consumption whilst caring for your engine.

The Davies, Craig EWP header adaptor kit can replace the mechanical water pump completely. (See EWP Header Adaptors on website)

The world s most advanced total engine cooling management

  • universal fit
  • more power
  • more cooling
  • increase fuel efficiency
  • extend engine life
  • world-leading technology
  • lightweight Alloy

LCD EWP & FAN DIGITAL CONTROLLER – 12 & 24 VOLT
This LCD EWP / Fan Digital Controller (Part #8001) is Australian designed and as part of this Australian manufacturing company s continuous improvement program this advanced Digital Controller boasts a suite of enhancements.

 

The updated LCD Digital Controller how has two specific functions. This unique Controller will now manage the operation of the EWP by varying the speed of the EWP in response to the temperature of the engine and manage control of your electric engine fan. The Controller has a push-button on the facia panel that offers target temperatures Singular degrees from 60 C (140 F) to 100 C (212 F).

Generally, higher engine temperature will offer improved fuel efficiency and lower engine temperature more power. The LCD Digital Controller will now operate the engine s electric fan automatically once the engine has reached 3c above the target temperature. A significant benefit too is the Controller allows the EWP to run on after ignition shutdown to reduce heat soak. It is recommended that engine operational temperatures be checked with manufacturer.

Features

  • – Black & White Numerical Screen
    – Celsius or Fahrenheit display option
  • – Select any set temp range from 60 C (140 F)to 100 C (212 F)
    – Set / targeted temperature memory
    – Override feature to assist bleeding EWP & fail safe
    – Input voltage display
    – Compatible with billeted style Electric Water Pumps

Warning Alarms:

  • – Plus 10 C (14 F) set/target temperature
    – Under temp 40 C after 5 mins
    – Temp sensor error
    – Over or under voltage
    – EWP error

 

 

Product Selection Guide

Application Pump Model Pump Kit Pump Combo Controller / Switch
Part #
12 V
Part #
24 V
Part#
12 V
Part #
24 V
Part #
12 V
Part #
24 V
Motorbike up to 500cc (Standard) EBP 15 9001       0444 or 0455  
Motorbike 500cc – 1000cc (Std) EBP 23 9050       0444 or 0455  
Motorbike 1000cc – 2000cc (Std) EBP 25 9005       0444 or 0455  
Vehicle Heater System (Standard) EBP 23 9050       0444 or 0455  
LPG (Butane) System (Standard) EBP 23 9050       0444 or 0455  
Intercooler
(depending on capacity)
EBP 23 9050          
EBP 25 9005          
EBP 40 9040 9041     0444 or 0455 0444 or 0455
EWP 80 8005   8907      
Engines up to 2.0L (Standard) EWP 80 8005   8907   8001 8001
Engines up to 2.0L – 3.5L (Standard) EWP 115 8025 or
8040
8026 or
8041
8930 or
8950
8931 or
8951
8001 8001
Engines up to 3.5L – 5.0L (Standard) EWP 130 8080 8081 8990 8991 8001 8001
Engines 5.0L or greater (Standard) EWP 150 8060 8061 8970 8971 8001 8001
Modified Engines
Supercharged/Turbo
EWP 150 8060 8061 8970 8971 8001 8001
Drag Racing, Drifting & Speedway EWP 150 8060 8061 8970 8971 8001 8001
Off Road / 4WDs EWP 130 8080 8081 8990 8991 8001 8001
Solar Hot Water Systems (depending on size) EBP 15 9001       0444 or 0455  
EBP 23 9050       0444 or 0455  
EBP 25 9005       0444 or 0455  
EBP 40 9040 9041     0444 or 0455 0444 or 0455

Worldwide Shipping

Yes! We ship to most countries via DHL. For a shipping quote add the items to your basket, update your address and it will calculate the shipping price. If you feel the price to be incorrect or no options are available, please get in contact providing your address inc name, contact number, and email address plus the products you wish to order.

When will my order be dispatched?

We aim to dispatch all "In Stock" items same working day if ordered before 12:00 Midday, orders placed after this time will be dispatched the following working day.

Out-of-stock items or items with a status of "Available from Supplier" are usually dispatched within 2 weeks. If there is urgency, or a more accurate date is required don't hesitate to get in touch with us.

Built-to-order manifolds are typically built in a 1st come 1st served order, and our lead times vary with demand, We advise contacting us to get our most up-to-date information

What shipping options are available?

Within the UK our main shipping methods are 1st Class Royal Mail and Next Day DHL. Orders under £50 and small in size may have the option for Royal Mail dispatch. However, for urgent orders we advise opting for the DHL Service

Outside the UK we almost exclusively use DHL, Shipping quotes can be obtained at the basket when entering the delivery address. For delivery destinations outside of the European Union (EU) items will be liable for import duty and taxes at the local rate. We are unfortunately unable to advise on these costs.

Additional information

Weight 3 kg
Type

Water Pump

Brand

Davies Craig

$349.94 ex Tax

1 in stock - Dispatched same working day when ordered before 12:00 Midday (additional stock can be backordered)

1 in stock - Dispatched same working day when ordered before 12:00 Midday (additional stock can be backordered)

Davies Craig EWP alloy pump mounting kit

SKU: DC8950 Category: Tag:

Description

Davies Craig EWP115 alloy pump & LCD controller combo

Take total control of your engine cooling with the Davies Craig EWP 115 Alloy Electric Water Pump and LCD EWP /Fan Digital Controller. The Controller will also manage the operation of your Thermatic Fan.

The EWP 115 (115 litres per minute) pump is suitable for small, medium, large, high-performance and 4WD vehicles. It s a performance accessory that improves engine cooling control and capacity whilst giving you more power and torque and improved fuel economy.

 

Kit Contents

EWP COMPONENTS

HARDWARE BAG COMPONENTS

Description

Qty

Description

Qty

EWP115 Alloy

1

Scotch Lock

1

EWP & FAN LCD Controller

1

Ring Terminal

1

Inline Adaptor

1

Ring Terminal (Yellow)

1

Wiring Harness (10A Fuse)

1

Self Tap Screws

1

Thin Rubber Sleeves

4

Temp Sensor Assembly

1

Hose Clamps

4

Mount Pad Hook & Loop 1

EWP Hardware Bag

1

   

 

Technical Specifications
Technical Specifications – EWP115   Technical Specification – LCD Controller
Operating voltage 3V DC to 15V DC Voltage range 12V DC to 29V DC
Maximum current 10A @ 13V Display LCD size 70mm (2.76 ) x 60mm (2.36 )
Flow rate (max) 115 L/min (30.38 US gal/min) @ 13V DC Maximum current 12Amps
Operating temp. -40 to 130 C (-40 to 266 F) Warning alarm High & low Temp., Above set temp., Sensor short circuit, Pump error, High & low voltage and Sensor open circuit
Pump design

Clockwise centrifugal with volute chamber

Targeted (set) temperatures Singular degrees from:
60 C (140 F) to 100 C (212 F)
Pump weight 920 grams (2.3 lb) Memory Set & targeted temperature
Pump material Aluminium (Powder Coated) Fan cut-in temp. 3 C (5.4 F) above the targeted (set) temperature
Burst pressure 500 kPa (72.5 psi) Controller type PCB with micro-processor
Seal Ceramic face seal Sensor type Thermister in housing

Fits hose sizes

&

Internal Thread

35mm to 51mm (1.38 to 2 )

 

-Inlet & Outlet: -16AN (12)

Overrun/ shutdown -10 C (14 F) below set/target temperature or 3 minutes
Indicators Temperature, power, EWP, test, fan, high & low temp, voltage, above set temperature (with alarm)
Push-On fitting Size

EWP Inlet & Outlet 38mm

  • with 3mm Sleeve (#8510) 44mm
  • with 6mm Sleeve (#8511) 51mm
Weight 100 grams (3.5 oz)
Dimensions

Length = 95mm (3.7″)

Width = 130mm (5.1″)

Depth = 25mm (1 )

 

Mechanical belt-driven water pumps run directly off the motor and sap engine power the EWP 115 is hardwired into your electrical system, by-passing the engine and releasing up to an additional 10kw (13hp). Combined with the LCD EWP / Fan Digital Controller, the pump continues to run after you ve switched off, eliminating heat soak and extending engine life.

Davies, Craig s revolutionary, Australian-designed EWP pumps are made from anti-corrosive, lightweight Alloy reinforced with fibreglass. Universal fit allows for easy mounting into the bottom radiator hose. Our kits come with easy-to-understand DIY instructions and everything you need for easy installation, including different adaptors to fit various hose sizes and all necessary electrical wiring.

The EWP 115 and LCD EWP / Fan Digital Controller Combo Pack is the most economical way to increase horsepower and save on fuel consumption whilst caring for your engine.

The Davies, Craig EWP header adaptor kit can replace the mechanical water pump completely. (See EWP Header Adaptors on website)

The world s most advanced total engine cooling management

  • universal fit
  • more power
  • more cooling
  • increase fuel efficiency
  • extend engine life
  • world-leading technology
  • lightweight Alloy

LCD EWP & FAN DIGITAL CONTROLLER – 12 & 24 VOLT
This LCD EWP / Fan Digital Controller (Part #8001) is Australian designed and as part of this Australian manufacturing company s continuous improvement program this advanced Digital Controller boasts a suite of enhancements.

 

The updated LCD Digital Controller how has two specific functions. This unique Controller will now manage the operation of the EWP by varying the speed of the EWP in response to the temperature of the engine and manage control of your electric engine fan. The Controller has a push-button on the facia panel that offers target temperatures Singular degrees from 60 C (140 F) to 100 C (212 F).

Generally, higher engine temperature will offer improved fuel efficiency and lower engine temperature more power. The LCD Digital Controller will now operate the engine s electric fan automatically once the engine has reached 3c above the target temperature. A significant benefit too is the Controller allows the EWP to run on after ignition shutdown to reduce heat soak. It is recommended that engine operational temperatures be checked with manufacturer.

Features

  • – Black & White Numerical Screen
    – Celsius or Fahrenheit display option
  • – Select any set temp range from 60 C (140 F)to 100 C (212 F)
    – Set / targeted temperature memory
    – Override feature to assist bleeding EWP & fail safe
    – Input voltage display
    – Compatible with billeted style Electric Water Pumps

Warning Alarms:

  • – Plus 10 C (14 F) set/target temperature
    – Under temp 40 C after 5 mins
    – Temp sensor error
    – Over or under voltage
    – EWP error

 

 

Product Selection Guide

Application Pump Model Pump Kit Pump Combo Controller / Switch
Part #
12 V
Part #
24 V
Part#
12 V
Part #
24 V
Part #
12 V
Part #
24 V
Motorbike up to 500cc (Standard) EBP 15 9001       0444 or 0455  
Motorbike 500cc – 1000cc (Std) EBP 23 9050       0444 or 0455  
Motorbike 1000cc – 2000cc (Std) EBP 25 9005       0444 or 0455  
Vehicle Heater System (Standard) EBP 23 9050       0444 or 0455  
LPG (Butane) System (Standard) EBP 23 9050       0444 or 0455  
Intercooler
(depending on capacity)
EBP 23 9050          
EBP 25 9005          
EBP 40 9040 9041     0444 or 0455 0444 or 0455
EWP 80 8005   8907      
Engines up to 2.0L (Standard) EWP 80 8005   8907   8001 8001
Engines up to 2.0L – 3.5L (Standard) EWP 115 8025 or
8040
8026 or
8041
8930 or
8950
8931 or
8951
8001 8001
Engines up to 3.5L – 5.0L (Standard) EWP 130 8080 8081 8990 8991 8001 8001
Engines 5.0L or greater (Standard) EWP 150 8060 8061 8970 8971 8001 8001
Modified Engines
Supercharged/Turbo
EWP 150 8060 8061 8970 8971 8001 8001
Drag Racing, Drifting & Speedway EWP 150 8060 8061 8970 8971 8001 8001
Off Road / 4WDs EWP 130 8080 8081 8990 8991 8001 8001
Solar Hot Water Systems (depending on size) EBP 15 9001       0444 or 0455  
EBP 23 9050       0444 or 0455  
EBP 25 9005       0444 or 0455  
EBP 40 9040 9041     0444 or 0455 0444 or 0455

Worldwide Shipping

Yes! We ship to most countries via DHL. For a shipping quote add the items to your basket, update your address and it will calculate the shipping price. If you feel the price to be incorrect or no options are available, please get in contact providing your address inc name, contact number, and email address plus the products you wish to order.

When will my order be dispatched?

We aim to dispatch all "In Stock" items same working day if ordered before 12:00 Midday, orders placed after this time will be dispatched the following working day.

Out-of-stock items or items with a status of "Available from Supplier" are usually dispatched within 2 weeks. If there is urgency, or a more accurate date is required don't hesitate to get in touch with us.

Built-to-order manifolds are typically built in a 1st come 1st served order, and our lead times vary with demand, We advise contacting us to get our most up-to-date information

What shipping options are available?

Within the UK our main shipping methods are 1st Class Royal Mail and Next Day DHL. Orders under £50 and small in size may have the option for Royal Mail dispatch. However, for urgent orders we advise opting for the DHL Service

Outside the UK we almost exclusively use DHL, Shipping quotes can be obtained at the basket when entering the delivery address. For delivery destinations outside of the European Union (EU) items will be liable for import duty and taxes at the local rate. We are unfortunately unable to advise on these costs.

Additional information

Weight 3 kg
Type

Water Pump

Brand

Davies Craig