Owen Developments GBT6986 Turbo

SKU: GBT6986

Description

Owen Developments GBT6986 Turbo

The 69mm frame GBT is the largest in the range. This option caters for the larger displacement or higher revving engines requiring greater power outputs. The 69mm is capable of producing engine output from 440- 820bhp using 2.0 to 4.0 litre engine configurations. As with the 61mm frame, there are 5 compressor wheel size choices and the Ma7 and Ma5 covers can both be used.

GBT 6976 Compressor wheel: Trim = 52.4 Inducer Diameter = 55.0mm Exducer Diameter = 76.0mm Power Range 440-600 BHP (engine configuration dependant)

GBT 6979 Compressor wheel: Trim = 52.4 Inducer Diameter = 57.2mm Exducer Diameter = 79.0mm Power Range 460-660 BHP (engine configuration dependant)

GBT 6982 Compressor wheel: Trim = 52.3 Inducer Diameter = 59.3mm Exducer Diameter = 82.0mm Power Range 490-720 BHP (engine configuration dependant)

GBT 6986 Compressor wheel: Trim = 52.4 Inducer Diameter = 62.3mm Exducer Diameter = 86.0mm Power Range 510-760 BHP (engine configuration dependant)

GBT 6988 Compressor wheel: Trim = 52.2 Inducer Diameter = 63.6mm Exducer Diameter = 88.0mm Power Range 530-820 BHP (engine configuration dependant)

 

Choose your turbo

Turbine Housing

The Owen Development GBT series of turbo allow you choose your fitting, The NT7.0 housing featuring V-Band inlet and Outlet (0.82 A/R), NT7.1 T3 Flanged inlet and V Band Outlet (0.82 A/R), NT7.2 T3 Flanged inlet and V Band Outlet (0.62 A/R)

 

Cooling

Water cooling is commonly run through O.E.M. and motorsport turbochargers, alike. However, for those applications where plumbing restrictions, packaging and weight saving is a key focus, then there is an option to upgrade the GBT unit to run an air-cooled housing. Owen Developments specially designed air and oil-cooled casting, has radial air fins, giving it a large surface area. Heat soak from the turbine wheel is dissipated substantially more than just using basic oil-cooling alone. Drawing heat away from the oil, bearing and rotational assembly parts reduces oil breakdown rates and improves component longevity. Walton Motorsport would always recommend Water cooling other than in exceptional circumstances.

Compressor Cover

MA3 Housing features a 3? Inlet and 2? outlet with a 0.58 A/R, MA5 Housing features a 4? Inlet and 2? outlet with a 0.61 A/R and the MA7 Housing features a 4? Inlet and 2.5? outlet with a 0.69 A/R

PORTED, NON-PORTED AND RESTRICTED COMPRESSOR COVERS – Generally, Owen Developments would suggest choosing a compressor cover with anti-surge ports; especially with the larger wheel sizes, as it widens the safe operating zone within the compressor map, increases top end flow and protects against low down surge. The advantage to not porting a cover is that it is significantly quieter. Most applications which run air restrictors are non-ported. The choice is down to the customer and either option can be provided. Bespoke restrictor fitment for specific race series can also be carried out with additional, custom inlet machining.

Colour

The GBT units come with a red anodised compressor wheel and black adaptor ring as standard. However, there is an option to select silver anodised wheels and adaptor ring if desired. In addition to giving the turbos a unique aesthetic appearance, the anodising creates a protective surface layer on the aluminium that prevents oxidisation and increases wear and scratch resistance.

 

Oil Filter and Restrictor in the feed union as standard

Many turbochargers fail due to debris contamination in the oil feed which can catastrophically damage the motorsport bearing components. This, newly designed, oil feed union houses a stainless steel mesh filter which will capture all, potentially damaging, debris and vastly increase turbo longevity. In-house testing has shown that the oil feed union will supply the bearing with an optimal amount of oil between 3 and 4 bar of oil pressure. When excessive oil is being supplied to the turbo as a result of higher oil pressure, a modified oil restrictor can be used. This can be inserted into the union and reduce oil flow by around 23%.

Boost Pressure Take off and Speed Sensor Fitment

Owen Developments have designed their new compressor cover castings so that they can be drilled and tapped for boost pressure and speed sensor fitment. This gives complete flexibility to what data needs to be extracted from the turbo when in operation. Speed sensor kits and boost pressure take-off kits can also be supplied on request.

Worldwide Shipping

Yes! We ship to most countries via DHL. For a shipping quote add the items to your basket, update your address and it will calculate the shipping price. If you feel the price to be incorrect or no options are available, please get in contact providing your address inc name, contact number, and email address plus the products you wish to order.

When will my order be dispatched?

We aim to dispatch all "In Stock" items same working day if ordered before 12:00 Midday, orders placed after this time will be dispatched the following working day.

Out-of-stock items or items with a status of "Available from Supplier" are usually dispatched within 2 weeks. If there is urgency, or a more accurate date is required don't hesitate to get in touch with us.

Built-to-order manifolds are typically built in a 1st come 1st served order, and our lead times vary with demand, We advise contacting us to get our most up-to-date information

What shipping options are available?

Within the UK our main shipping methods are 1st Class Royal Mail and Next Day DHL. Orders under £50 and small in size may have the option for Royal Mail dispatch. However, for urgent orders we advise opting for the DHL Service

Outside the UK we almost exclusively use DHL, Shipping quotes can be obtained at the basket when entering the delivery address. For delivery destinations outside of the European Union (EU) items will be liable for import duty and taxes at the local rate. We are unfortunately unable to advise on these costs.

Additional information

Exhaust Housing

NT7.0 – Vband In & Vband Out (0.82 A/R), NT7.1 – T3 In & Vband Out (0.82 A/R), NT7.2 – T3 In & Vband Out (0.62 A/R)

Compressor Cover

MA3 0.58 A/R (3" inlet, 2" outlet) Ported, MA5 0.61 A/R (4" inlet, 2" outlet) Ported, MA7 0.69 A/R (4" inlet, 2.5" outlet) Ported

Colour

Red & Black, Silver

Cooling

Water

Brand

Owen Developments

From: $1,601.59 ex Tax

Please select options below for stock status

SKU: GBT6986 Category: Tag:

Description

Owen Developments GBT6986 Turbo

The 69mm frame GBT is the largest in the range. This option caters for the larger displacement or higher revving engines requiring greater power outputs. The 69mm is capable of producing engine output from 440- 820bhp using 2.0 to 4.0 litre engine configurations. As with the 61mm frame, there are 5 compressor wheel size choices and the Ma7 and Ma5 covers can both be used.

GBT 6976 Compressor wheel: Trim = 52.4 Inducer Diameter = 55.0mm Exducer Diameter = 76.0mm Power Range 440-600 BHP (engine configuration dependant)

GBT 6979 Compressor wheel: Trim = 52.4 Inducer Diameter = 57.2mm Exducer Diameter = 79.0mm Power Range 460-660 BHP (engine configuration dependant)

GBT 6982 Compressor wheel: Trim = 52.3 Inducer Diameter = 59.3mm Exducer Diameter = 82.0mm Power Range 490-720 BHP (engine configuration dependant)

GBT 6986 Compressor wheel: Trim = 52.4 Inducer Diameter = 62.3mm Exducer Diameter = 86.0mm Power Range 510-760 BHP (engine configuration dependant)

GBT 6988 Compressor wheel: Trim = 52.2 Inducer Diameter = 63.6mm Exducer Diameter = 88.0mm Power Range 530-820 BHP (engine configuration dependant)

 

Choose your turbo

Turbine Housing

The Owen Development GBT series of turbo allow you choose your fitting, The NT7.0 housing featuring V-Band inlet and Outlet (0.82 A/R), NT7.1 T3 Flanged inlet and V Band Outlet (0.82 A/R), NT7.2 T3 Flanged inlet and V Band Outlet (0.62 A/R)

 

Cooling

Water cooling is commonly run through O.E.M. and motorsport turbochargers, alike. However, for those applications where plumbing restrictions, packaging and weight saving is a key focus, then there is an option to upgrade the GBT unit to run an air-cooled housing. Owen Developments specially designed air and oil-cooled casting, has radial air fins, giving it a large surface area. Heat soak from the turbine wheel is dissipated substantially more than just using basic oil-cooling alone. Drawing heat away from the oil, bearing and rotational assembly parts reduces oil breakdown rates and improves component longevity. Walton Motorsport would always recommend Water cooling other than in exceptional circumstances.

Compressor Cover

MA3 Housing features a 3? Inlet and 2? outlet with a 0.58 A/R, MA5 Housing features a 4? Inlet and 2? outlet with a 0.61 A/R and the MA7 Housing features a 4? Inlet and 2.5? outlet with a 0.69 A/R

PORTED, NON-PORTED AND RESTRICTED COMPRESSOR COVERS – Generally, Owen Developments would suggest choosing a compressor cover with anti-surge ports; especially with the larger wheel sizes, as it widens the safe operating zone within the compressor map, increases top end flow and protects against low down surge. The advantage to not porting a cover is that it is significantly quieter. Most applications which run air restrictors are non-ported. The choice is down to the customer and either option can be provided. Bespoke restrictor fitment for specific race series can also be carried out with additional, custom inlet machining.

Colour

The GBT units come with a red anodised compressor wheel and black adaptor ring as standard. However, there is an option to select silver anodised wheels and adaptor ring if desired. In addition to giving the turbos a unique aesthetic appearance, the anodising creates a protective surface layer on the aluminium that prevents oxidisation and increases wear and scratch resistance.

 

Oil Filter and Restrictor in the feed union as standard

Many turbochargers fail due to debris contamination in the oil feed which can catastrophically damage the motorsport bearing components. This, newly designed, oil feed union houses a stainless steel mesh filter which will capture all, potentially damaging, debris and vastly increase turbo longevity. In-house testing has shown that the oil feed union will supply the bearing with an optimal amount of oil between 3 and 4 bar of oil pressure. When excessive oil is being supplied to the turbo as a result of higher oil pressure, a modified oil restrictor can be used. This can be inserted into the union and reduce oil flow by around 23%.

Boost Pressure Take off and Speed Sensor Fitment

Owen Developments have designed their new compressor cover castings so that they can be drilled and tapped for boost pressure and speed sensor fitment. This gives complete flexibility to what data needs to be extracted from the turbo when in operation. Speed sensor kits and boost pressure take-off kits can also be supplied on request.

Worldwide Shipping

Yes! We ship to most countries via DHL. For a shipping quote add the items to your basket, update your address and it will calculate the shipping price. If you feel the price to be incorrect or no options are available, please get in contact providing your address inc name, contact number, and email address plus the products you wish to order.

When will my order be dispatched?

We aim to dispatch all "In Stock" items same working day if ordered before 12:00 Midday, orders placed after this time will be dispatched the following working day.

Out-of-stock items or items with a status of "Available from Supplier" are usually dispatched within 2 weeks. If there is urgency, or a more accurate date is required don't hesitate to get in touch with us.

Built-to-order manifolds are typically built in a 1st come 1st served order, and our lead times vary with demand, We advise contacting us to get our most up-to-date information

What shipping options are available?

Within the UK our main shipping methods are 1st Class Royal Mail and Next Day DHL. Orders under £50 and small in size may have the option for Royal Mail dispatch. However, for urgent orders we advise opting for the DHL Service

Outside the UK we almost exclusively use DHL, Shipping quotes can be obtained at the basket when entering the delivery address. For delivery destinations outside of the European Union (EU) items will be liable for import duty and taxes at the local rate. We are unfortunately unable to advise on these costs.

Additional information

Exhaust Housing

NT7.0 – Vband In & Vband Out (0.82 A/R), NT7.1 – T3 In & Vband Out (0.82 A/R), NT7.2 – T3 In & Vband Out (0.62 A/R)

Compressor Cover

MA3 0.58 A/R (3" inlet, 2" outlet) Ported, MA5 0.61 A/R (4" inlet, 2" outlet) Ported, MA7 0.69 A/R (4" inlet, 2.5" outlet) Ported

Colour

Red & Black, Silver

Cooling

Water

Brand

Owen Developments