Davies Craig EWP80 pump kit

SKU: DC8005

Description

The EWP 80 Electric Water Pump simple, do-it-yourself, easy to install, designed to complement or replace your existing belt-driven, mechanical water pump. It will fit most vehicle makes and models fitted with naturally-aspirated or turbo engines up to two litres. The revolutionary, Australian-designed EWP 80 is made from anti-corrosive, lightweight, heat-resistant, glass-filled nylon and incorporates a ceramic faced seal for long-life durability.

The EWP 80 greatly enhances engine cooling control while giving you added power and improved fuel economy. By removing the parasitic power losses of a belt-driven, mechanical water pump the EWP can provide up to 10kW (13hp) of extra power and increased torque.

 

EWP80 KIT CONTENTS
Description Quantity
EWP80 Pump 12V 1
EWP80 Hardware Bag 1
EWP Straight Adatpor 35mm 1
EWP L-Adaptors 35mm 1
EWP Adaptor O-Ring 2
Rubber Sleeve 3mm 2
Hose Clamp 2
EWP Basic Pump Loom 1
EWP Universal Instructions 1

 

Technical Specifications
Voltage 12 Volt Pump
Operating voltage 3V DC to 15V DC
Maximum current 7.5A @ 13V
Flow rate (max) 80 L/min (21.13 US gal/min) @ 13V DC
Operating temp. -40 to 130 C (-40 to 266 F)
Pump design Clockwise centrifugal with volute chamber
Pump weight 900 grams (2.0 lb)
Pump material Nylon 66, 30% glass-filled
Burst pressure 350 kPa (50 psi)
Seal Ceramic face seal
Fits hose sizes 32mm to 51mm (1 to 2 )

 

Combined with an LCD EWP /Fan Digital Controller (Sold separately Part #8001 or combo #8907) will manage both the EWP and Thermatic fan operation. The Digital Controller will vary the speed of the EWP in response to the engine s coolant temperature. Multiple temperature settings are provided on the Controller for either maximum power or fuel efficiency. The Thermatic Fan/s will be activated automatically once the engine coolant rises 3 C (5.4 F) above the targeted (set) temperature. The Digital Controller will automatically run on for three minutes (or to 10 C / 14 F below the set temperature) after engine shut down, eliminating heat soak and extending engine life. The EWP 80 Digital Controller Combo is supplied in a do-it-yourself kit with everything you need for fitment to your vehicle s engine, including an easy-to-follow DIY instruction booklet.

The world s most advanced total engine cooling management system:

universal fit

more power

more cooling

increase fuel efficiency

extend engine life

world-leading technology

lightweight Nylon

 

 

Product Selection Guide

Application Pump Model Pump Kit Pump Combo Controller / Switch
Part #
12 V
Part #
24 V
Part#
12 V
Part #
24 V
Part #
12 V
Part #
24 V
Motorbike up to 500cc (Standard) EBP 15 9001       0444 or 0455  
Motorbike 500cc – 1000cc (Std) EBP 23 9050       0444 or 0455  
Motorbike 1000cc – 2000cc (Std) EBP 25 9005       0444 or 0455  
Vehicle Heater System (Standard) EBP 23 9050       0444 or 0455  
LPG (Butane) System (Standard) EBP 23 9050       0444 or 0455  
Intercooler
(depending on capacity)
EBP 23 9050          
EBP 25 9005          
EBP 40 9040 9041     0444 or 0455 0444 or 0455
EWP 80 8005   8907      
Engines up to 2.0L (Standard) EWP 80 8005   8907   8001 8001
Engines up to 2.0L – 3.5L (Standard) EWP 115 8025 or
8040
8026 or
8041
8930 or
8950
8931 or
8951
8001 8001
Engines up to 3.5L – 5.0L (Standard) EWP 130 8080 8081 8990 8991 8001 8001
Engines 5.0L or greater (Standard) EWP 150 8060 8061 8970 8971 8001 8001
Modified Engines
Supercharged/Turbo
EWP 150 8060 8061 8970 8971 8001 8001
Drag Racing, Drifting & Speedway EWP 150 8060 8061 8970 8971 8001 8001
Off Road / 4WDs EWP 130 8080 8081 8990 8991 8001 8001
Solar Hot Water Systems (depending on size) EBP 15 9001       0444 or 0455  
EBP 23 9050       0444 or 0455  
EBP 25 9005       0444 or 0455  
EBP 40 9040 9041     0444 or 0455 0444 or 0455

Additional information

Weight 3 kg
Brand

Davies Craig

Type

Water Pump

£128.39 ex VAT

Usually Next Day if ordered before 12:30 but allow 48hours

Usually Next Day if ordered before 12:30 but allow 48hours

SKU: DC8005 Category: Tag:

Description

The EWP 80 Electric Water Pump simple, do-it-yourself, easy to install, designed to complement or replace your existing belt-driven, mechanical water pump. It will fit most vehicle makes and models fitted with naturally-aspirated or turbo engines up to two litres. The revolutionary, Australian-designed EWP 80 is made from anti-corrosive, lightweight, heat-resistant, glass-filled nylon and incorporates a ceramic faced seal for long-life durability.

The EWP 80 greatly enhances engine cooling control while giving you added power and improved fuel economy. By removing the parasitic power losses of a belt-driven, mechanical water pump the EWP can provide up to 10kW (13hp) of extra power and increased torque.

 

EWP80 KIT CONTENTS
Description Quantity
EWP80 Pump 12V 1
EWP80 Hardware Bag 1
EWP Straight Adatpor 35mm 1
EWP L-Adaptors 35mm 1
EWP Adaptor O-Ring 2
Rubber Sleeve 3mm 2
Hose Clamp 2
EWP Basic Pump Loom 1
EWP Universal Instructions 1

 

Technical Specifications
Voltage 12 Volt Pump
Operating voltage 3V DC to 15V DC
Maximum current 7.5A @ 13V
Flow rate (max) 80 L/min (21.13 US gal/min) @ 13V DC
Operating temp. -40 to 130 C (-40 to 266 F)
Pump design Clockwise centrifugal with volute chamber
Pump weight 900 grams (2.0 lb)
Pump material Nylon 66, 30% glass-filled
Burst pressure 350 kPa (50 psi)
Seal Ceramic face seal
Fits hose sizes 32mm to 51mm (1 to 2 )

 

Combined with an LCD EWP /Fan Digital Controller (Sold separately Part #8001 or combo #8907) will manage both the EWP and Thermatic fan operation. The Digital Controller will vary the speed of the EWP in response to the engine s coolant temperature. Multiple temperature settings are provided on the Controller for either maximum power or fuel efficiency. The Thermatic Fan/s will be activated automatically once the engine coolant rises 3 C (5.4 F) above the targeted (set) temperature. The Digital Controller will automatically run on for three minutes (or to 10 C / 14 F below the set temperature) after engine shut down, eliminating heat soak and extending engine life. The EWP 80 Digital Controller Combo is supplied in a do-it-yourself kit with everything you need for fitment to your vehicle s engine, including an easy-to-follow DIY instruction booklet.

The world s most advanced total engine cooling management system:

universal fit

more power

more cooling

increase fuel efficiency

extend engine life

world-leading technology

lightweight Nylon

 

 

Product Selection Guide

Application Pump Model Pump Kit Pump Combo Controller / Switch
Part #
12 V
Part #
24 V
Part#
12 V
Part #
24 V
Part #
12 V
Part #
24 V
Motorbike up to 500cc (Standard) EBP 15 9001       0444 or 0455  
Motorbike 500cc – 1000cc (Std) EBP 23 9050       0444 or 0455  
Motorbike 1000cc – 2000cc (Std) EBP 25 9005       0444 or 0455  
Vehicle Heater System (Standard) EBP 23 9050       0444 or 0455  
LPG (Butane) System (Standard) EBP 23 9050       0444 or 0455  
Intercooler
(depending on capacity)
EBP 23 9050          
EBP 25 9005          
EBP 40 9040 9041     0444 or 0455 0444 or 0455
EWP 80 8005   8907      
Engines up to 2.0L (Standard) EWP 80 8005   8907   8001 8001
Engines up to 2.0L – 3.5L (Standard) EWP 115 8025 or
8040
8026 or
8041
8930 or
8950
8931 or
8951
8001 8001
Engines up to 3.5L – 5.0L (Standard) EWP 130 8080 8081 8990 8991 8001 8001
Engines 5.0L or greater (Standard) EWP 150 8060 8061 8970 8971 8001 8001
Modified Engines
Supercharged/Turbo
EWP 150 8060 8061 8970 8971 8001 8001
Drag Racing, Drifting & Speedway EWP 150 8060 8061 8970 8971 8001 8001
Off Road / 4WDs EWP 130 8080 8081 8990 8991 8001 8001
Solar Hot Water Systems (depending on size) EBP 15 9001       0444 or 0455  
EBP 23 9050       0444 or 0455  
EBP 25 9005       0444 or 0455  
EBP 40 9040 9041     0444 or 0455 0444 or 0455

Additional information

Weight 3 kg
Brand

Davies Craig

Type

Water Pump