Davies Craig EWP150 alloy pump & LCD controller combo

SKU: DC8970

Description

Davies Craig EWP150 alloy pump & LCD controller combo

Muscle up your engine cooling system with the Davies Craig EWP  150 alloy Electric Water Pump and the LCD EWP /Fan Digital Controller.

Like all EWPs, this advanced unit is designed for remote mounting in the engine bay to satisfy those higher horsepower, turbocharged, supercharged and worked engines which develop excessive heat.

 

EWP COMPONENTS

HARDWARE BAG COMPONENTS

Description

Qty

Description

Qty

EWP150 Alloy Short Kit

1

Scotch Lock

1

EWP & FAN Controller

1

Ring Terminal

1

Inline Adaptor

1

Ring Terminal (Yellow)

1

Wiring Harness (10A Fuse)

1

Self Tap Screws

1

Thin Rubber Sleeves

2

Temp Sensor Assembly

1

Hose Clamps

4

   

EWP Hardware Bag

1

   

 

Technical Specifications
Technical Specifications – EWP150   Technical Specification – LCD Controller
Operating voltage 3V DC to 15V DC Voltage range 12V DC to 29V DC
Maximum current 10A @ 13V Display LCD size 70mm (2.76 ) x 60mm (2.36 )
Flow rate (max) 150L/min (39.63 US gal/min) @ 13V DC Maximum current 12Amps
Operating temp. -40 to 130 C (-40 to 266 F) Warning alarm High & low Temp., Above set temp., Sensor short circuit, Pump error, High & low voltage and Sensor open circuit
Pump design

Clockwise centrifugal with volute chamber

Targeted (set) temperatures Singular degrees from:
60 C (140 F) to 100 C (212 F)
Pump weight 1,170 grams (2.6 lb) Memory Set & targeted temperature
Pump material Aluminium (Powder Coated) Fan cut-in temp. 3 C (5.4 F) above the targeted (set) temperature
Burst pressure 500 kPa (72.5 psi) Controller type PCB with micro-processor
Seal Ceramic face seal Sensor type Thermister in housing

Fits hose size

35mm to 51mm (1.38 to 2 )

Overrun/ shutdown -10 C (14 F) below set/target temperature or 3 minutes
Indicators Temperature, power, EWP, test, fan, high & low temp, voltage, above set temperature (with alarm)
Internal Thread -Inlet & Outlet: -16AN (12) Weight 100 grams (3.5 oz)
Push-On fitting Size

EWP Inlet & Outlet 38mm

  • with 3mm Sleeve (#8510) 44mm
  • with 6mm Sleeve (#8511) 51mm
Dimensions

Length = 95mm (3.7″)

Width = 130mm (5.1″)

Depth = 25mm (1 )

 

The compact EWP 150 alloy unit is manufactured with AN-16 internal inlet and outlet threads for neat, tight screw-in fitting applications. This rugged alloy hi-flow electric water pump is designed to complement or replace the engine s existing mechanical water pump. This essential performance part increases power to
your vehicle s drive wheels and improves coolant temperature control.

The EWP 150 is a universal, do-it-yourself, easy installation fitment to engines up to seven litres. By removing the parasitic power losses of belt-driven water pumps, the EWP 150 releases up to 10kW (13hp) of extra power, increased torque and fuel savings. Combine it with the LCD EWP /Fan Digital Controller and the pump continues to run after you ve switched off, eliminating heat soak and extending engine life.

The EWP 150 and LCD EWP /Fan Digital Controller Combo Kit is the most economical way to increase horsepower and save on fuel consumption whilst caring for your engine.

 

LCD EWP & FAN DIGITAL CONTROLLER – 12 & 24 VOLT
This LCD EWP / Fan Digital Controller (Part #8001) is Australian designed and as part of this Australian manufacturing company s continuous improvement program this advanced Digital Controller boasts a suite of enhancements.

 

The updated LCD Digital Controller how has two specific functions. This unique Controller will now manage the operation of the EWP by varying the speed of the EWP in response to the temperature of the engine and manage control of your electric engine fan. The Controller has a push-button on the facia panel that offers target temperatures Singular degrees from 60 C (140 F) to 100 C (212 F).

Generally, higher engine temperature will offer improved fuel efficiency and lower engine temperature more power. The LCD Digital Controller will now operate the engine s electric fan automatically once the engine has reached 3c above the target temperature. A significant benefit too is the Controller allows the EWP to run on after ignition shutdown to reduce heat soak. It is recommended that engine operational temperatures be checked with manufacturer.

Features

  • – Black & White Numerical Screen
    – Celsius or Fahrenheit display option
  • – Select any set temp range from 60 C (140 F)to 100 C (212 F)
    – Set / targeted temperature memory
    – Override feature to assist bleeding EWP & fail safe
    – Input voltage display
    – Compatible with billeted style Electric Water Pumps

Warning Alarms:

  • – Plus 10 C (14 F) set/target temperature
    – Under temp 40 C after 5 mins
    – Temp sensor error
    – Over or under voltage
    – EWP error
  •  

 

Product Selection Guide

Application Pump Model Pump Kit Pump Combo Controller / Switch
Part #
12 V
Part #
24 V
Part#
12 V
Part #
24 V
Part #
12 V
Part #
24 V
Motorbike up to 500cc (Standard) EBP 15 9001       0444 or 0455  
Motorbike 500cc – 1000cc (Std) EBP 23 9050       0444 or 0455  
Motorbike 1000cc – 2000cc (Std) EBP 25 9005       0444 or 0455  
Vehicle Heater System (Standard) EBP 23 9050       0444 or 0455  
LPG (Butane) System (Standard) EBP 23 9050       0444 or 0455  
Intercooler
(depending on capacity)
EBP 23 9050          
EBP 25 9005          
EBP 40 9040 9041     0444 or 0455 0444 or 0455
EWP 80 8005   8907      
Engines up to 2.0L (Standard) EWP 80 8005   8907   8001 8001
Engines up to 2.0L – 3.5L (Standard) EWP 115 8025 or
8040
8026 or
8041
8930 or
8950
8931 or
8951
8001 8001
Engines up to 3.5L – 5.0L (Standard) EWP 130 8080 8081 8990 8991 8001 8001
Engines 5.0L or greater (Standard) EWP 150 8060 8061 8970 8971 8001 8001
Modified Engines
Supercharged/Turbo
EWP 150 8060 8061 8970 8971 8001 8001
Drag Racing, Drifting & Speedway EWP 150 8060 8061 8970 8971 8001 8001
Off Road / 4WDs EWP 130 8080 8081 8990 8991 8001 8001
Solar Hot Water Systems (depending on size) EBP 15 9001       0444 or 0455  
EBP 23 9050       0444 or 0455  
EBP 25 9005       0444 or 0455  
EBP 40 9040 9041     0444 or 0455 0444 or 0455

Additional information

Weight 3 kg
Type

Water Pump

Brand

Davies Craig

£306.00

2 in stock - Dispatched same working day when ordered before 12:00 Midday (additional stock can be backordered)

2 in stock - Dispatched same working day when ordered before 12:00 Midday (additional stock can be backordered)

Davies Craig EWP alloy pump mounting kit

SKU: DC8970 Category: Tag:

Description

Davies Craig EWP150 alloy pump & LCD controller combo

Muscle up your engine cooling system with the Davies Craig EWP  150 alloy Electric Water Pump and the LCD EWP /Fan Digital Controller.

Like all EWPs, this advanced unit is designed for remote mounting in the engine bay to satisfy those higher horsepower, turbocharged, supercharged and worked engines which develop excessive heat.

 

EWP COMPONENTS

HARDWARE BAG COMPONENTS

Description

Qty

Description

Qty

EWP150 Alloy Short Kit

1

Scotch Lock

1

EWP & FAN Controller

1

Ring Terminal

1

Inline Adaptor

1

Ring Terminal (Yellow)

1

Wiring Harness (10A Fuse)

1

Self Tap Screws

1

Thin Rubber Sleeves

2

Temp Sensor Assembly

1

Hose Clamps

4

   

EWP Hardware Bag

1

   

 

Technical Specifications
Technical Specifications – EWP150   Technical Specification – LCD Controller
Operating voltage 3V DC to 15V DC Voltage range 12V DC to 29V DC
Maximum current 10A @ 13V Display LCD size 70mm (2.76 ) x 60mm (2.36 )
Flow rate (max) 150L/min (39.63 US gal/min) @ 13V DC Maximum current 12Amps
Operating temp. -40 to 130 C (-40 to 266 F) Warning alarm High & low Temp., Above set temp., Sensor short circuit, Pump error, High & low voltage and Sensor open circuit
Pump design

Clockwise centrifugal with volute chamber

Targeted (set) temperatures Singular degrees from:
60 C (140 F) to 100 C (212 F)
Pump weight 1,170 grams (2.6 lb) Memory Set & targeted temperature
Pump material Aluminium (Powder Coated) Fan cut-in temp. 3 C (5.4 F) above the targeted (set) temperature
Burst pressure 500 kPa (72.5 psi) Controller type PCB with micro-processor
Seal Ceramic face seal Sensor type Thermister in housing

Fits hose size

35mm to 51mm (1.38 to 2 )

Overrun/ shutdown -10 C (14 F) below set/target temperature or 3 minutes
Indicators Temperature, power, EWP, test, fan, high & low temp, voltage, above set temperature (with alarm)
Internal Thread -Inlet & Outlet: -16AN (12) Weight 100 grams (3.5 oz)
Push-On fitting Size

EWP Inlet & Outlet 38mm

  • with 3mm Sleeve (#8510) 44mm
  • with 6mm Sleeve (#8511) 51mm
Dimensions

Length = 95mm (3.7″)

Width = 130mm (5.1″)

Depth = 25mm (1 )

 

The compact EWP 150 alloy unit is manufactured with AN-16 internal inlet and outlet threads for neat, tight screw-in fitting applications. This rugged alloy hi-flow electric water pump is designed to complement or replace the engine s existing mechanical water pump. This essential performance part increases power to
your vehicle s drive wheels and improves coolant temperature control.

The EWP 150 is a universal, do-it-yourself, easy installation fitment to engines up to seven litres. By removing the parasitic power losses of belt-driven water pumps, the EWP 150 releases up to 10kW (13hp) of extra power, increased torque and fuel savings. Combine it with the LCD EWP /Fan Digital Controller and the pump continues to run after you ve switched off, eliminating heat soak and extending engine life.

The EWP 150 and LCD EWP /Fan Digital Controller Combo Kit is the most economical way to increase horsepower and save on fuel consumption whilst caring for your engine.

 

LCD EWP & FAN DIGITAL CONTROLLER – 12 & 24 VOLT
This LCD EWP / Fan Digital Controller (Part #8001) is Australian designed and as part of this Australian manufacturing company s continuous improvement program this advanced Digital Controller boasts a suite of enhancements.

 

The updated LCD Digital Controller how has two specific functions. This unique Controller will now manage the operation of the EWP by varying the speed of the EWP in response to the temperature of the engine and manage control of your electric engine fan. The Controller has a push-button on the facia panel that offers target temperatures Singular degrees from 60 C (140 F) to 100 C (212 F).

Generally, higher engine temperature will offer improved fuel efficiency and lower engine temperature more power. The LCD Digital Controller will now operate the engine s electric fan automatically once the engine has reached 3c above the target temperature. A significant benefit too is the Controller allows the EWP to run on after ignition shutdown to reduce heat soak. It is recommended that engine operational temperatures be checked with manufacturer.

Features

  • – Black & White Numerical Screen
    – Celsius or Fahrenheit display option
  • – Select any set temp range from 60 C (140 F)to 100 C (212 F)
    – Set / targeted temperature memory
    – Override feature to assist bleeding EWP & fail safe
    – Input voltage display
    – Compatible with billeted style Electric Water Pumps

Warning Alarms:

  • – Plus 10 C (14 F) set/target temperature
    – Under temp 40 C after 5 mins
    – Temp sensor error
    – Over or under voltage
    – EWP error
  •  

 

Product Selection Guide

Application Pump Model Pump Kit Pump Combo Controller / Switch
Part #
12 V
Part #
24 V
Part#
12 V
Part #
24 V
Part #
12 V
Part #
24 V
Motorbike up to 500cc (Standard) EBP 15 9001       0444 or 0455  
Motorbike 500cc – 1000cc (Std) EBP 23 9050       0444 or 0455  
Motorbike 1000cc – 2000cc (Std) EBP 25 9005       0444 or 0455  
Vehicle Heater System (Standard) EBP 23 9050       0444 or 0455  
LPG (Butane) System (Standard) EBP 23 9050       0444 or 0455  
Intercooler
(depending on capacity)
EBP 23 9050          
EBP 25 9005          
EBP 40 9040 9041     0444 or 0455 0444 or 0455
EWP 80 8005   8907      
Engines up to 2.0L (Standard) EWP 80 8005   8907   8001 8001
Engines up to 2.0L – 3.5L (Standard) EWP 115 8025 or
8040
8026 or
8041
8930 or
8950
8931 or
8951
8001 8001
Engines up to 3.5L – 5.0L (Standard) EWP 130 8080 8081 8990 8991 8001 8001
Engines 5.0L or greater (Standard) EWP 150 8060 8061 8970 8971 8001 8001
Modified Engines
Supercharged/Turbo
EWP 150 8060 8061 8970 8971 8001 8001
Drag Racing, Drifting & Speedway EWP 150 8060 8061 8970 8971 8001 8001
Off Road / 4WDs EWP 130 8080 8081 8990 8991 8001 8001
Solar Hot Water Systems (depending on size) EBP 15 9001       0444 or 0455  
EBP 23 9050       0444 or 0455  
EBP 25 9005       0444 or 0455  
EBP 40 9040 9041     0444 or 0455 0444 or 0455

Additional information

Weight 3 kg
Type

Water Pump

Brand

Davies Craig