Davies Craig EWP130 alloy pump kit

SKU: DC8080

Description

Davies Craig EWP130 alloy pump kit

Turbocharge your engine cooling with the Davies, Craig EWP 130 alloy Electric Water Pump. Like all the EWPs, this unit is designed for universal engine fitment, to satisfy those larger and higher horsepower, turbocharged, supercharged and worked engines which develop excessive heat. The EWP 130 configuration mirrors the highly successful EWP 80 which offers a numerous selection of attachment options, including elbow and straight adaptors which can be bolted on to both the inlet and outlet for simple remote engine mounting.

The EWP 130 will be supplied with one each of the 35mm (1 ) straight and elbow alloy adaptors, O rings and mounting hardware along with two 3mm ( ) rubber adaptor sleeves. The respective 38 mm (1 ) alloy adaptors and 6mm ( ) rubber adaptor sleeves are optional.

This rugged alloy hi-flow electric water pump is designed to complement or replace the engine s existing mechanical water pump. This essential performance product increases power to your vehicle s drive wheels and improves coolant temperature
control. By removing the parasitic power losses of belt-driven water pumps, the EWP 130 releases up to 10kW (13hp) of extra power, increased torque and fuel savings.

EWP – Controller – Electric Fan – Installation Video

 

 

KIT CONTENTS

DESCRIPTION

UNITS

EWP130 Alloy 12 Volt Pump

1

Alloy elbow adaptor – 35mm (1 ) 1
Alloy straight adaptor – 35mm (1 ) 1
Hose Clamps 2
Rubber adaptor sleeve – 3mm ( ) 1
O ring 2
Wiring Harness 1
Adapter Rubber Sleeves 3mm 2

 

Technical Specifications

Voltage 12 Volt Pump
Operating voltage 3V DC to 15V DC
Maximum current 10A @ 13V
Flow rate (max)

130 L/min

(34.34 US gal/min) @ 13V DC

Operating temp. -40 to 130 C (-40 to 266 F)
Pump design Clockwise centrifugal with volute chamber
Pump weight

1,226grams

(2.7 lb)

Pump material

Aluminium

(Powder Coated)

Burst pressure

500 kPa

(72.5 psi)

Seal Ceramic face seal
Fits hose sizes

35mm to 51mm

(1 to 2 )

 

Combine it with the LCD EWP /Fan Digital Controller (Sold separately Part #8000 or combo #8890) and the pump continues to run after you’ve switched off, eliminating heat soak and extending engine life. The EWP 130 and LCD EWP /Fan Digital Controller Combo Kit is the most economical way to increase horsepower and save on fuel consumption whilst caring for your engine.

The Davies, Craig EWP header adaptor kit can replace the mechanical water pump completely.

Turbocharge your engine cooling management
universal fit
more power
more cooling
increase fuel efficiency
extend engine life
world-leading technology
lightweight alloy

Product Selection Guide

Application Pump Model Pump Kit Pump Combo Controller / Switch
Part #
12 V
Part #
24 V
Part#
12 V
Part #
24 V
Part #
12 V
Part #
24 V
Motorbike up to 500cc (Standard) EBP 15 9001       0444 or 0455  
Motorbike 500cc – 1000cc (Std) EBP 23 9050       0444 or 0455  
Motorbike 1000cc – 2000cc (Std) EBP 25 9005       0444 or 0455  
Vehicle Heater System (Standard) EBP 23 9050       0444 or 0455  
LPG (Butane) System (Standard) EBP 23 9050       0444 or 0455  
Intercooler
(depending on capacity)
EBP 23 9050          
EBP 25 9005          
EBP 40 9040 9041     0444 or 0455 0444 or 0455
EWP 80 8005   8807      
Engines up to 2.0L (Standard) EWP 80 8005   8807   8000 8000
Engines up to 2.0L – 3.5L (Standard) EWP 115 8025 or
8040
8026 or
8041
8830 or
8850
8831 or
8851
8000 8000
Engines up to 3.5L – 5.0L (Standard) EWP 130 8080 8081 8890 8891 8000 8000
Engines 5.0L or greater (Standard) EWP 150 8060 8061 8870 8871 8000 8000
Modified Engines
Supercharged/Turbo
EWP 150 8060 8061 8870 8871 8000 8000
Drag Racing, Drifting & Speedway EWP 150 8060 8061 8870 8871 8000 8000
Off Road / 4WDs EWP 130 8080 8081 8890 8891 8000 8000
Solar Hot Water Systems (depending on size) EBP 15 9001       0444 or 0455  
EBP 23 9050       0444 or 0455  
EBP 25 9005       0444 or 0455  
EBP 40 9040 9041     0444 or 0455 0444 or 0455

Additional information

Weight 3 kg
Type

Water Pump

Brand

Davies Craig

£192.00

Usually Next Day if ordered before 12:30 but allow 48hours

Usually Next Day if ordered before 12:30 but allow 48hours

Davies Craig EWP alloy pump mounting kit

SKU: DC8080 Category: Tag:

Description

Davies Craig EWP130 alloy pump kit

Turbocharge your engine cooling with the Davies, Craig EWP 130 alloy Electric Water Pump. Like all the EWPs, this unit is designed for universal engine fitment, to satisfy those larger and higher horsepower, turbocharged, supercharged and worked engines which develop excessive heat. The EWP 130 configuration mirrors the highly successful EWP 80 which offers a numerous selection of attachment options, including elbow and straight adaptors which can be bolted on to both the inlet and outlet for simple remote engine mounting.

The EWP 130 will be supplied with one each of the 35mm (1 ) straight and elbow alloy adaptors, O rings and mounting hardware along with two 3mm ( ) rubber adaptor sleeves. The respective 38 mm (1 ) alloy adaptors and 6mm ( ) rubber adaptor sleeves are optional.

This rugged alloy hi-flow electric water pump is designed to complement or replace the engine s existing mechanical water pump. This essential performance product increases power to your vehicle s drive wheels and improves coolant temperature
control. By removing the parasitic power losses of belt-driven water pumps, the EWP 130 releases up to 10kW (13hp) of extra power, increased torque and fuel savings.

EWP – Controller – Electric Fan – Installation Video

 

 

KIT CONTENTS

DESCRIPTION

UNITS

EWP130 Alloy 12 Volt Pump

1

Alloy elbow adaptor – 35mm (1 ) 1
Alloy straight adaptor – 35mm (1 ) 1
Hose Clamps 2
Rubber adaptor sleeve – 3mm ( ) 1
O ring 2
Wiring Harness 1
Adapter Rubber Sleeves 3mm 2

 

Technical Specifications

Voltage 12 Volt Pump
Operating voltage 3V DC to 15V DC
Maximum current 10A @ 13V
Flow rate (max)

130 L/min

(34.34 US gal/min) @ 13V DC

Operating temp. -40 to 130 C (-40 to 266 F)
Pump design Clockwise centrifugal with volute chamber
Pump weight

1,226grams

(2.7 lb)

Pump material

Aluminium

(Powder Coated)

Burst pressure

500 kPa

(72.5 psi)

Seal Ceramic face seal
Fits hose sizes

35mm to 51mm

(1 to 2 )

 

Combine it with the LCD EWP /Fan Digital Controller (Sold separately Part #8000 or combo #8890) and the pump continues to run after you’ve switched off, eliminating heat soak and extending engine life. The EWP 130 and LCD EWP /Fan Digital Controller Combo Kit is the most economical way to increase horsepower and save on fuel consumption whilst caring for your engine.

The Davies, Craig EWP header adaptor kit can replace the mechanical water pump completely.

Turbocharge your engine cooling management
universal fit
more power
more cooling
increase fuel efficiency
extend engine life
world-leading technology
lightweight alloy

Product Selection Guide

Application Pump Model Pump Kit Pump Combo Controller / Switch
Part #
12 V
Part #
24 V
Part#
12 V
Part #
24 V
Part #
12 V
Part #
24 V
Motorbike up to 500cc (Standard) EBP 15 9001       0444 or 0455  
Motorbike 500cc – 1000cc (Std) EBP 23 9050       0444 or 0455  
Motorbike 1000cc – 2000cc (Std) EBP 25 9005       0444 or 0455  
Vehicle Heater System (Standard) EBP 23 9050       0444 or 0455  
LPG (Butane) System (Standard) EBP 23 9050       0444 or 0455  
Intercooler
(depending on capacity)
EBP 23 9050          
EBP 25 9005          
EBP 40 9040 9041     0444 or 0455 0444 or 0455
EWP 80 8005   8807      
Engines up to 2.0L (Standard) EWP 80 8005   8807   8000 8000
Engines up to 2.0L – 3.5L (Standard) EWP 115 8025 or
8040
8026 or
8041
8830 or
8850
8831 or
8851
8000 8000
Engines up to 3.5L – 5.0L (Standard) EWP 130 8080 8081 8890 8891 8000 8000
Engines 5.0L or greater (Standard) EWP 150 8060 8061 8870 8871 8000 8000
Modified Engines
Supercharged/Turbo
EWP 150 8060 8061 8870 8871 8000 8000
Drag Racing, Drifting & Speedway EWP 150 8060 8061 8870 8871 8000 8000
Off Road / 4WDs EWP 130 8080 8081 8890 8891 8000 8000
Solar Hot Water Systems (depending on size) EBP 15 9001       0444 or 0455  
EBP 23 9050       0444 or 0455  
EBP 25 9005       0444 or 0455  
EBP 40 9040 9041     0444 or 0455 0444 or 0455

Additional information

Weight 3 kg
Type

Water Pump

Brand

Davies Craig